Charger for PS3 controllers small improvementКристиан Георгиев
Unscrew 2 more screws on the board and set it aside. When you connect the device via USB, blue diodes light up. When the controller is connected, the red diode lights up and the charging process https://jiji.com.et/51-studio-equipment is in progress. After buying a charger for PS4 controllers as a gift, I had an idea to buy something similar to myself. The order was made on March 30, there was another $2 coupon. Thanks for When the controller is charged, the blue LED lights up again.
Charger for PS3 controllers small improvement
I didn’t like it very much, because. in fact, there is a console load on the connector, although the controller does not have a lot of weight …
Let’s https://tonaton.ng/s_301-concrete-batch-plants try to fix it. As a result, it turned out cheaper than on Aliexpress. I have one Dualshock 3 controller at home, the second is still on the way.
My joy knew no bounds, it looks great, just like I wanted. Peel off the legs, unscrew the 4 screws. I ran for a lighter and tried to gently heat the hot melt adhesive on the connectors. I took the devices by reading the review of the original (Refurbished) Dualshock 3 controller We unscrew one more screw and remove a small bar. The parcel was without a track. The angle of the mini USB port is too high.
I took it from the post office on April 25, the box was pretty crushed, the charge remained intact. Here is what we see in the https://tonaton.co.tz/s_20-lockers end.
There are no special devices at home to heat this area locally. Having connected the controller, there is a gap of about 4-5 mm between the guides on which it should lie and the controller itself. But not without a fly in the ointment. Decreased the angle of inclination, now the controller touches the guides.
Strongly do not scold, I am writing a review for the first time. With inaccurate use, the chance of breaking it increases many times over. Connectors sit on hot glue.